Casting Fifth Wheel
Casting Fifth Wheel Couplings for Semi-Trailer Applications
Casting Fifth Wheel couplings connect a tractor unit to a semi-trailer through the trailer kingpin and the fifth wheel locking mechanism. For replacement and new vehicle applications, the key specifications include kingpin size, D-value, imposed load, mounting height, and mounting pattern.
The correct configuration must match the tractor chassis, semi-trailer connection system, and required operating loads.
Casting Fifth Wheel Specifications
The following specifications determine the selection of a casting fifth wheel coupling:
| Specification | Available Configuration or Required Information |
|---|---|
| Kingpin Size | 2-inch or 3.5-inch configuration, subject to model |
| D-Value | Model-specific rated coupling value |
| Imposed Load | Model-specific maximum vertical load |
| Mounting Height | Confirm according to the tractor chassis and installation arrangement |
| Mounting Pattern | Confirm the applicable mounting dimensions and standard |
| Locking Mechanism | Confirm the compatible locking jaw and release arrangement |
The D-value and imposed load must be checked against the applicable vehicle combination and the coupling's rated specifications. A higher nominal rating should not be assumed without confirming the complete installation requirements.
Mounting Dimensions and Compatibility
Casting fifth wheel couplings are available in different kingpin and mounting configurations. The main compatibility details are:
- Kingpin diameter and connection type.
- Fifth wheel mounting height.
- Mounting hole spacing and base plate dimensions.
- Coupling plate dimensions and throat arrangement.
- Locking jaw and release mechanism configuration.
For replacement orders, provide the existing fifth wheel model or its dimensional drawing to help identify the required configuration.
Casting Fifth Wheel Configuration
Casting fifth wheel assemblies use cast structural components together with a locking mechanism and mounting arrangement. The detailed construction, dimensions, and rated loads vary by product model.
The applicable product drawing and rating plate should be used to verify the actual configuration before installation or replacement.
Request a Casting Fifth Wheel Quotation
Send us your required kingpin size, target D-value, imposed load, mounting height, product reference number, and order quantity.
If you are replacing an existing coupling, you can also provide its product photos or dimensional drawing. This information will help establish the required specification for your enquiry.








